The PoolLab® 1.0 is the perfect solution for professional water analysis of pools and spas.
The fixed but exchangeable cuvette allows quick sampling by simply dipping the IP68 waterproof PoolLab® into the
water.
6 buttons give direct access to the ZERO process (only 1x required per measurement series) as well as the individual
measurement methods: pH, chlorine (free|combined|total), alkalinity (acid capacity), cyanuric acid (stabiliser), active oxygen (MPS), bromine, chlorine dioxide, ozone, hydrogen peroxide, hardness (total, calcium), urea and PHMB.
The PoolLab® 1.0 is Bluetooth® equipped and can therefore be connected to the free LabCom® software and app to
synchronise test results by account, print reports and even receive dosing recommendations based on individually
entered water care products. LSI index calculation is also offered via the software and app. A free cloud service – if desired – ensures that the software and app always work with synchronised data.
Parameters:
pH
Chlorine (free | comb. | total)
Alkalinity (Acid Capacity)
Cyanuric Acid (Stabilizer)
Active Oxygen (MPS)*
Bromine**
Chlorine Dioxide**
Ozone**
Hydrogen Peroxide*
Calcium Hardness*
Total Hardness*
Urea*
PHMB*
Basic Kit:
1 x PoolLab® 1.0 with
Bluetooth®, IP68 waterproof
1 x Transparent plastic case
1 x Light shield
1 x Plastic stirring rod
1 x 10ml syringe
3 x AAA batteries
1 x Manual
In the basic kit included reagents:
20 x tablets Phenol Red
20 x tablets DPD N° 1
10 x tablets DPD N° 3
10 x tablets Alkalinity–M
10 x tablets CYA–Test
All tablets are
Photometer grade.
Free access to PoolLab®
software, app & cloud
The PoolLab 1.0 has ended its production life and has been superseded by the PoolLab 2.0.